You are currently on our United Kingdom website. You can also switch to one of our many other locations worldwide.
All locations

ContiEarth™

Sideview on a construction side with different vehicles.

Construction - ContiEarth™

Our commercial specialty tyres follow the customised solution approach with our ContiEarth™ range. This means, every tyre line was developed for an individual vehicle type and therefore takes into consideration the requirements of each machine.

As a leading technology company, we combine our strength in the automotive and rubber sector and present our intelligent tyre as an essential part of the ContiEarth™ range. The intelligent tyre means that each tyre of our ContiEarth™ range already comes with an integrated sensor. The sensor is able to constantly monitor inflation pressure as well as tyre temperature, and can transmit the information in real time to the ContiPressureCheck™ system. With the help of additional components, the data can be visualised either via handheld tool or a display in the driver cabin.



Continental RDT-Master for Rigid Dump Trucks

Our RDT-Master is designed for rigid dump trucks, which transport heavy loads over long distances in rough terrain. In these severe conditions, tyres have to offer high stability and good traction, even at high speeds. In addition, the tyres need to be extremely resistant to cuts and tears.

Our RDT-Master’s special tread design - featuring a deep tread depth and a wide and flat tread radius - offers high loading capacity and cutting resistance. The angled tread edges, in addition to the open shoulder design, facilitate high lateral stability which results in better driving characteristics. Maximum traction is guaranteed, even on winding terrain and while driving high speeds. Moreover, the open tread design results in excellent self-cleaning characteristics.

Our RDT-Master E4 is available in the sizes 18.00R33, 21.00R33 and 24.00R35


Continental EM-Master for ADTs, loaders and dozers

 

Articulated Dump Trucks (ADTs), Loaders and Dozers are used for transporting large quantities of bulk or aggregate material in extreme conditions, ranging from soft and muddy soil to gravelly and rocky terrain in construction or mining sites. Durability, excellent traction, and superior resistance to rock cutting and heat generation are essential to operate in these extreme conditions.

Em Master E4

Our EM-Master is customised for these specific demands. The tyre is available in two versions with different tyre tread designs.

Our EM-Master E3/L3 features a normal tread depth and wide spacing between the blocks. This results in excellent self-cleaning characteristics, good traction and maneuverability, even in muddy terrain. The open tread design and normal tread depth of 100% offers better cooling characteristics and therefore less heat buildup, resulting in a long service life.

Compared to the E3/L3 our EM-Master E4/L4 features a greater block size, with less spacing between the blocks and a deeper tread depth. The tyre offers high carcass protection and superior cutting resistance, minimising the risk of punctures and downtime. The smaller tread block spacing results in smooth running, even on hard surfaces. Due to its high tread wear volume, the EM-Master E4/L4 also offers an excellent service life.

Both our EM-Master E3/L3 and E4/L4 will be available in the sizes 23.5R25, 26.5R25 and 29.5R25. The EM-Master E3/L3 will be additionally available in the size 20.5R25.